Undergraduate Materials Processing Lab |
(This site is under construction. Please pardon our appearance as we assemble information for this page)
|
Holden 126
|
390 ft^2
|
Lab Supervisor: David Berry
|
Capabilities and Equipment:
Impact Tester ()
Rolling Mill for sheet and wire (Grobet, USA)
Benchtop Tensile/Compression Test Unit (ComTen)
Benchtop Hydraulic Presses (Carver)
Creep Test Unit (ATS)
Cold Isostatic Press (Fluitron)
50 Ton Laminating Press (Dake)
Convection Dryer (Labconco)
|
Safety Alerts:
Torso
-Impact
Hand Hazards
-Abrasion/Puncture
-Extreme Heat
Respiratory
-Particulate
Eye Hazard
-Dust/Flying Debris
-Impact
|
Safety Links:
Chemical Hygiene Plan
http://www.ehss.vt.edu/programs/HCM_lab_require.php
Environmental Health and Safety
http://www.ehss.vt.edu/
http://www.ehss.vt.edu/training/
|
| Emergency Contacts: Dave Berry (any time of night on weekends or holidays) |
Other info:
http://www.pp.okstate.edu/ehs/links/index.htm |
