Journal Papers

K.E. Knipling, G. Zeman, J.S. Marte, S.M. Kelly, and S.L. Kampe; "Effects of Dissolved Tungsten on the Deformation of 70Ni-30Fe Alloys," Metall. Mater. Trans. A, Vol. 35A, 2821-2828 (2004).

E.C. Pappas, S.L. Kampe, R.G. Kander, and R.W. Hendricks, "An Assessment Analysis Methodology and its Application to an Advanced Engineering Communications Program," J. Eng Education, Vol. 93 (3), July 2004, 233-246.

S.M. Kelly and S.L. Kampe, "Microstructural Evolution in Laser-Deposited Multi-Layer Ti-6Al-4V Builds – Part I: Microstructural Characterization," Metall. Mater. Trans. A, Vol. 35A (6), 2004, 1861-1867.

S.M. Kelly and S.L. Kampe, "Microstructural Evolution in Laser-Deposited Multi-Layer Ti-6Al-4V Builds – Part II: Thermal Modeling," Metall. Mater. Trans. A, Vol. 35 A (6), 2004, 1869-1879.

J.S. Marte, T. Zahrah, and S.L. Kampe, "Codeformation Processing and Modeling of In-situ Mechanically-dissimilar Multiphase Composites," Metall. Mater. Trans A, Vol. 35A (5) 1603-1611 (2004).

J.S. Marte, T. Zahrah, and S.L. Kampe, "In Situ Multilithic Metal Matrix Composites Produced by Codeformation Processing," Materials Science Forum, Vols. 426-432, 2003, 1991-1996.

J.S. Marte, S.L. Kampe, and A. Wereszczak, "Elevated Temperature Deformation of Titanium Aluminide Matrix Composites," Materials Science and Engineering A, Vol. 346 (1-2) 292-301 (2003).

R. Martin, S.L. Kampe, J.S. Marte, and T. Pete, "Microstructure/Processing Relationships in Reaction Synthesized Titanium Aluminide Intermetallic Matrix Composites," Metall. Mater. Trans. A, 33A [8] 2747-2753 (2002).

Conference Proceedings

Joseph Butler, J.P. Schultz, and S.L. Kampe; “In situ Strength Distribution in Nextel-Reinforced Aluminum Matrix Composites,” TMS Annual Meeting, February 25 - March 1, 2007, Orlando, FL.

Alex Aning, C.A. Wensley, J.P. Schultz, and S.L. Kampe; “Properties of NiW-Reinforced Ni-Matrix Composites,” TMS Annual Meeting, February 25 - March 1, 2007, Orlando, FL.

E. Jeffers, M. Wooddell, D.W. Berry, and S.L. Kampe; “Reaction Synthesis of Titanium Aluminide/Titanium Diboride In situ Metal Matrix Composites,” to be published in the conference symposium proceedings of Innovative Processing and Synthesis of Ceramics, Glasses, and Composites, Materials Science and Technology 2006 Conference, 15-19 October 2006, Cincinnati, OH.  

B.D. Poquette, J.P. Schultz, T. Asare, and S.L. Kampe; “Near Room-Temperature Consolidation of Ferroelectric Ceramic Reinforced Multifunctional Metal Matrix Composites by Electroforming,” to be published in the proceedings of the 15 th International Symposium on Processing and Fabrication of Advanced Materials (PFAM XV), Materials Science and Technology 2006 Conference, 15-19 October 2006, Cincinnati, OH.

B.D. Poquette, T.A. Asare, J.P. Schultz, and S.L. Kampe, "High Damping in Piezoelectric Ceramic Reinforced Metal Matrix Composites," to be presented at the 29 th International Conference on Advanced Ceramics and Composites, The American Ceramic Society, Cocoa Beach, FL, 23-28 January 2005, in press.  

T.A. Asare, B.D. Poquette, J.P. Schultz, and S.L. Kampe, "Piezoelectric Damping in Copper based Metal Matrix Composites," to be presented at the 29 th International Conference on Advanced Ceramics and Composites, The American Ceramic Society, Cocoa Beach, FL, 23-28 January 2005, in press.  

S.M. Kelly, S.S. Babu, S.A. David, T. Zacharia, and S.L. Kampe, "A Microstructure Model for Laser Processing of Ti-6Al-4V," 7 th International Conference on Trends in Welding Research (conf. proc.), 16-20 May 2005, Pine Mountain, GA, ASM International and the American Welding Society, in press.  

T.A. Asare, J.P. Schultz, B.D. Poquette, A.O. Aning, and S.L. Kampe, "Mechanical Dynamic Analysis of Metal-Particulate Ferroelectric Ceramic Composites; Copper Barium-Titanate (CBT) System," in Science and Technology of Powder Materials: Synthesis, Consolidation, and Properties (symposium proceedings), Materials Science & Technology 2005 Conference and Exhibition, 25-28 September 2005, Pittsburgh, PA.  

B.D. Poquette, J.P. Schultz, T.A. Asare, A.O. Aning, and S.L. Kampe; "Ferroelectric Reinforced Metal Matrix Composites for Damping Applications," in Science and Technology of Powder Materials: Synthesis, Consolidation, and Properties (symposium proceedings), Materials Science & Technology 2005 Conference and Exhibition, 25-28 September 2005, Pittsburgh, PA.

C.A. Wensley, A.O. Aning, J.P. Schultz, and S.L. Kampe; "Processing of Amorphous Ni-W Reinforced Metal Matrix Composites," in Science and Technology of Powder Materials: Synthesis, Consolidation, and Properties (symposium proceedings), Materials Science & Technology 2005 Conference and Exhibition, 25-28 September 2005, Pittsburgh, PA, accepted based on abstract.  

S.L. Kampe, M.C. Paretti, C.B. Burgoyne, and D.E. Clark, "Leveraging the "Traditional" MSE Degree with an Intensive Communications-Across-the-Curriculum Program," in What Makes a Good Materials Engineer and How Best to Education Them , Materials Science & Technology 2005 Conference and Exhibition, 25-28 September 2005, Pittsburgh, PA, accepted based on abstract.  

A. Maisano, J.P. Schultz, A.O. Aning, and S.L. Kampe; "The Effect of Alloy Composition on Cryomilling Behavior," in Science and Technology of Powder Materials: Synthesis, Consolidation, and Properties (symposium proceedings), Materials Science & Technology 2005 Conference and Exhibition, 25-28 September 2005, Pittsburgh, PA, accepted based on abstract.  

S.M. Kelly, S.S. Babu, S.A. David, T. Zacharia, and S.L. Kampe, "Modeling the Microstructural Evolution During Repeated Thermal Cycling of Ti-6Al-4V," in Modeling and Simulation of Titanium Technology: Theory and Practices (topical symposium proceedings), Materials Science & Technology 2005 Conference and Exhibition, 25-28 September 2005, Pittsburgh, PA, accepted based on abstract

A.J. Maisano, D.D. Ramanan, A.O. Aning, and S.L. Kampe, "Hall-Petch Like Behavior in Ceramic Reinforced Polymer Matrix Composites," 11th International Conference on Composites/Nano Engineering (ICCE-11), Hilton Head, S.C., 17-18, August 8-14, 2004.

J.S. Franklin, A.O. Aning, and S.L. Kampe; "In-situ Synthesis of Piezoelectric-Reinforced Metal Matrix Composites," TMS Letters (Proceedings from the 2004 TMS Annual Meeting, February 2004, Charlotte, NC) Vol. 1 (3), TMS, Warrendale, PA, 2004, 61-62.

A.C. Goff, A.O. Aning, and S.L. Kampe; "A Model to Predict the Damping Potential of Piezoelectric-Reinforced Metal Matrix Composites," TMS Letters (Proceedings from the 2004 TMS Annual Meeting, February 2004, Charlotte, NC), Vol. 1 (3), TMS, Warrendale, PA, 2004, 59-60.

S.M. Kelly, S.S. Babu, S.A. David, T. Zacharia, and S.L. Kampe; "A Thermal and Microstructural Model for Laser Deposition of Ti-6Al-4V," in Cost Affordable Titanium (Symposium Proceedings from the 2004 TMS Annual Meeting, February 2004, Charlotte, NC), eds. F.H. Froes, M.A. Iman, D. Fray; TMS, Warrendale, PA, 2004, 45-52.

S.M. Kelly, S.S. Babu, S.A. David, T. Zacharia, and S.L. Kampe; "A Coupled Thermal and Microstructural Model for Laser Processing of Ti-6Al-4V," Proceedings of the 85th Annual American Welding Society Convention and Welding Show (AWS 2004, 6-8 April 2004, Chicago, IL), AWS, Miami, FL, 66-68.

S.M. Kelly and S.L. Kampe, "Characterization and Thermal Modeling of Laser Formed Ti-6Al-4V," 2002 International Conference on Metal Powder Deposition for Rapid Manufacturing, San Antonio, Texas, MPIF, Princeton, N.J., 104-111, April 8-10, 2002.

S.L. Kampe, "Method to Incorporate Green Engineering in Material Selection and Design," Proceedings of the American Society for Engineering Education Annual Conference and Exposition, (Proc. Int. Conf., Montreal, 17-19 June 2002), ASEE, Washington, D.C., 2002, pp. 1625.1-1625.7.

S.M. Kelly and S.L. Kampe, "Microstructural Study and Thermal Modeling of Laser Formed Ti-6Al-4V," Electronactive Polymers and Rapid Prototyping (Proceedings, MRS Symp., 26-30 November 2001, Boston, MA), eds. Y. Bar-Cohen, Q.M. Zhang, E. Fukada, S. Bauer, D.B. Chrisey, S.C. Danforth, 698, Warrendale, PA, 293-399 (2002).

Invited Presentations/Papers

S.L. Kampe and J.S. Marte, “An Overview of In Situ Metal Matrix Composite Processing and Its Application to Boride-Reinforced Titanium Alumnides,” Invited, TMS Annual Meeting, February 25 - March 1, 2007, Orlando , FL.

S.L. Kampe, T. Dillaha, and M.H. Gregg, "The Green Engineering Program at VirginiaTech," Green Engineering Workshop and Study Group, Dept. of Industrial and Mechanical Engineering, Kettering University, Flint, Mich., September 29-30, 2004.

S.L. Kampe, A.O. Aning, J.Schultz, T.A. Asare, and B.D. Poquette, "Piezoelectric Reinforced Metal Matrix Composites," invited talk, 11th International Conference on Composites/Nano Engineering (ICCE-11), Hilton Head, S.C., 657-658, August 8-14, 2004.

S.M. Kelly and S.L. Kampe, "A Thermal and Microstructural Model for Laser Processing of Ti-6Al-4V," ONR Workshop ion Advanced Materials and Processing (by invitation only), Woods Hole, Mass., June 2-4, 2004.

S.M. Kelly and S.L. Kampe, "Process and Microstructural Mapping of Laser Formed Ti-6Al-4V," ONR Woods Hole Workshop (by invitation), Woods Hole, Mass., May 28-30, 2003.

J.S. Marte, T. Zahrah, and S.L. Kampe, "In Situ Multilithic Metal Matrix Composites Produced by Codeformation Processing," invited presentation and paper, International Conference on Processing and Manufacturing of Advanced Materials (Thermec ’03), Madrid, Spain, July 7-11, 2003.

S.M. Kelly and S.L. Kampe, "Thermal and Microstructural Modeling of Laser Metal Deposited Ti-6Al-4V" (invited), Metals and Alloys Branch Seminar, Air Force Research Laboratories, Dayton, Ohio, July 28, 2003.

S.L. Kampe, "Incorporating Green Engineering in Material Selection and Design," Plenary Presentation (invited), 18th Annual National Educators Workshop, Hampton and Newport News, Va., October 21, 2003.

S.M. Kelly and S.L. Kampe, "Process and Microstructural Modeling of Laser Formed Ti-6Al-4V" (invited), NASA-Langley Research Center, Hampton, Va., October 20, 2003.

S.L. Kampe, "In Situ Metal Matrix Composites," invited seminar, NASA-Marshall Space Flight Center, Microgravity Sciences and Applications Division, Huntsville, Ala., October 6, 2003.

S.M. Kelly and S.L. Kampe, "Processing / Structure / Property Relationships in Advanced Alloys and Composites," ONR Woods Hole Workshop, Woods Hole, Mass., May 27-29, 2002.

S.L. Kampe, A.C. Goff, J. Franklin, "Structural-plus-Damping Multifunctionality Using Piezoelectric-Reinforced Composites," invited, Space Manufacturing and Related Technologies Workshop, Center for Nondestructive Evaluation and Applied Technologies, The Johns Hopkins University, Baltimore, Md., July 26, 2002.

Submitted Presentations

S.L. Kampe, "Piezoelectric-reinforced Metal Matrix Composites for High Damping," Virginia Tech Undergraduate Research Seminar Series, October 8, 2004.

E.C. Pappas, S.L. Kampe, R.W. Hendricks, and R.G. Kander, "The MSE Communications Program at Virginia Tech," 18th Annual National Educators Workshop, Hampton and Newport News, Va., October 20, 2003.

S.M. Kelly and S.L. Kampe, "Characterization and Thermal Modeling of Laser Formed Ti-6Al-4V" (poster), Virginia Materials Showcase, Virginia’s Center for Innovative Technology (CIT), Herndon, Va., June 6, 2002.

A. Goff, J.S. Franklin, and S.L. Kampe, "Solvent-Assisted Reaction Synthesis of a Piezoelectric-Reinforced Metal Matrix Composite" (poster), Virginia Materials Showcase, Virginia’s Center for Innovative Technology (CIT), Herndon, Va., June 6, 2002.

K.E. Knipling, N.E. Dowling, and S.L. Kampe, "HCF-LCF Interactions in Ti-6Al-4V" (poster), Virginia Materials Showcase, Virginia’s Center for Innovative Technology (CIT), Herndon, Va., June 6, 2002.

S.M. Kelly and S.L. Kampe, "Characterization and Thermal Modeling of Laser Formed Ti-6Al-4V" (poster), Center for High Performance Manufacturing (CHPM) Biannual Meeting, Blacksburg, Va., June 13-14, 2002.

Software and Patents

S.L. Kampe, J.P. Schultz, A.O. Aning, A. Goff, J. Franklin, "Piezoelectric Ceramic-Reinforced Metal Matrix Composites for Vibration Damping and Structural Applications, Utility Patent awarded, 5/3/05; Provisional patent claims partially accepted and resubmitted, 5/3/06.

A. Goff, J. Franklin, and S.L. Kampe, "Piezoelectric Ceramic-Reinforced Metal Matrix Composites for Vibration Damping and Structural Applications, Provisional Patent, VTIP, 5/23/04.